Wall Printer Spare Parts — Stocked, Warrantied and Matched to Your Machine
A wall printer earns its keep on site, and the parts behind it decide whether a breakdown is a phone call or a dead machine. We keep genuine spare parts for the units we ship, matched to the machine you run — core parts stocked for at least five years, a 12-month parts warranty, and a spare printhead already in the crate on a new unit. Factory-direct, from the same line that builds the machine, so a repair means a matched part on its way, not a hunt for something that fits.
Core parts kept in stock for at least five years — the machine you buy isn't orphaned
Spare Parts Stocked for Five Years
Core parts kept in stock, year after year
≥5 yrsHeld as in-house stock — a part that fails has a genuine replacement waiting, matched to your machine.
The worst outcome for a working machine is a small failure it can't recover from — a part that no one stocks anymore, on a unit that's suddenly worth scrap. That doesn't happen here.
Core parts for the machines we ship are stocked for at least five years, held as in-house stock on the same line that builds the units — so a part that fails has a genuine replacement waiting, matched to your machine rather than sourced from whatever fits.
New machines go one step further: a spare printhead ships in the crate, so the single part most likely to interrupt a job is already on your bench the day the unit arrives — no first-week wait if something goes wrong early.
Because parts come factory-direct from the builder, a replacement is the same part that went into the machine, not a generic substitute — the supply line behind a unit you buy, kept open for years.
What the 24-Month Warranty Covers
Every machine we ship carries a 24-month parts warranty — if a covered part fails in normal use inside the first year, the replacement is on us, matched to your unit and sent factory-direct. The cover runs across the part classes that actually keep a machine printing.
Print heads
The imaging core, covered as a replacement part under warranty. Need consumable heads or ink to keep printing? That's supply, and it's on inks & liquids.
Motion & carriage
The rails, belts and carriage assembly that move the head across the wall — the moving parts that see the work.
Mainboard & electronics
The control board and drive electronics that run the print — the parts that keep the machine talking to itself.
Motors & drives
The motors that carry the motion system — covered so the drive behind every pass is backed for the first year.
Cover starts before the machine even prints: a 7-day transit damage cover protects the unit on the freight leg, so damage in shipping is handled rather than argued over. Between the transit cover and the 12-month parts warranty, the first year on site is backed end to end.
The Parts We Stock
Spare parts are held by part class and matched to your specific unit when you order — so this is what we keep, not a catalogue of numbers to decode. Tell us the machine and we confirm the exact matched part. This is the shape of what's in stock.
-
Print heads (replacement)
The imaging core as a warranty-covered replacement part — tier-1 piezo class, matched to the head your machine runs. The same heads as a consumable supply live on inks & liquids.
-
Mechanical & motion parts
Rails, belts, carriage and the moving assembly that carries the head — the parts that see the most wear on a machine that works.
-
Electronics
Mainboard, drive boards and control electronics — the parts that run the print and keep the motion accurate.
-
Wear parts
The small consumable-adjacent parts that get replaced over a machine's life, kept in stock so a routine swap isn't a special order.
Which exact part fits depends on your machine and its configuration, so we confirm the matched part against your unit rather than posting part numbers to guess from.
How Spare Parts Match Your Machine
Ordering a spare part isn't a hunt through part numbers — every part is matched to the machine you run. Which unit you have (or bought from us) tells us exactly which matched part you need, and it all comes from the same factory that builds the machine. The way it works is simple.
Tell us your machine
Which unit you run — or bought from us — tells us exactly which matched part you need. No cross-referencing numbers, no guessing whether it fits.
We pull the matched part
From in-house stock on the line that builds the machine, dispatched factory-direct — the same part that went into your unit, ready to ship rather than sourced to order.
You get a quote, not a price list
Because the right part depends on your machine and what failed, pricing is quoted to your case rather than posted here. Ask and we'll put a real number in front of you.
Consumables — inks, cleaning fluids and print head supply — are on inks & liquids; job-ready add-ons like mounts, tools, protection and transport are on accessories. Want the machine's own specs — print area, speed, configuration? Those live on each product page. This page is the spare parts and the supply behind them.
Request a Spare Parts Quote
Tell us the machine you run and which part you need, and you get a factory-direct quote back for the matched spare part from stock — no part numbers to hunt, no full-container minimum. Not sure which machine you're running yet? Say so, and we'll help you work out which part it needs.